Steintec TuffJoint Brush In Mortar 12.5kg
£44.95 per 12.5kg tub
This revolutionary cementitious brush-in grout is easy to use and suitable for all types of paving such as Porcelain, Sandstone, Concrete and Granite. For use on paths, patios and driveways. tuffjoint Utility does NOT CONTAIN Resins or Polymers.
Available in three colours Flint, Anthracite and Hessian and supplied in 12.5 kg tubs with a coverage of up to 31 m2. Follow link to calculate quantity needed
tuffjoint Utility has been produced and tested for easy use and for high quality, hard wearing jointing with no mixing required.
- Sweep in the dry mortar using a squeegee and/or a broom/brush.
- When joints are full, remove dry excess tuffjoint Utility from the paving.
- Apply water using a hose, and set on a fine mist spray until water pools on the surface.
- Use a Washboy or Washboy Pro to clean the paving units.
As tuffjoint Utility is swept in dry, any excess can be returned to the tub and used at a later date, resulting in minimal wastage.
tuffjoint Utility can be used on wet paving. However, dry paving allows the mortar to flow easier and allows for unused tuffjoint Utility to be returned to the tub for future use.
The joints may need topping up after watering, as the water added will push the mortar into any voids in the joints. Pour mortar onto affected areas and then repeat the process.
A hose with a fine mist spray or hand sprayer should be used to wet the mortar once brushed into the joints.
- Anthracite, Flint, Hessian
- Reviews (0)
Be the first to review this product!
Please complete the form below to receive a bespoke quotation for this product. We shall only use your postcode to calculate delivery costs. Alternatively, please contact us on 01932 569277 to discuss your requirements.